Xperia Android phones repair damaged and boot loop

The Xperia Android phones repair damaged and boot loop - I'll give you a tutorial which is so beneficial to all who suffered damage to the android phones, especially mobile phones Sony Ericcson Xperia manifold.

In general, the damage caused by someone failing / have not managed to flash their phone is bootloop (failed start-ups or those who often say android just stop at logo Sony / Samsung only). Slightly worse due to failed flashing, the phone 'suspended animation'. Will not turn on at all, as if the power button is not working and it looks like the phone can no longer be left unharmed.
 
The Xperia Android phones repair damaged and bootloop is not as difficult as we imagine. The most appropriate solution is only one. Flash back to stock firmware. Surely with the added risk of failing flashing corrupted our phones.
 
That we need if you want to flash back to stock firmware is software Flashtool (for flashing), Driver (phone that we read on a computer), Stock Firmware (which we will enter into the phone), Data Cable (for media transfer) and a mobile phone Xperia to be repaired.
A. Preparation
• Download Flashtool
• to download the driver does not need to because there is a folder inside Flashtool. Optional can use PC Companion or other software that provides the driver for your Xperia
• Download Stock Firmware
The first step, along with Flashtool install drivers on your PC. Once installed, copy the format FTF stock firmware that was downloaded to C: / Flashtool / firmwares.


The next step of execution. Open Flashtool, select the image and click Flashmode Flash on Mode Selector. Select your stock firmware earlier.

If you've been flashing using Flashtool and after mixing with the stock firmware earlier kernels or other stock firmware and you are confused which one your stock firmware, how to find it very easy. For the kernel, usually only have loader. Sin and kernel.sin content. While the complete stock firmware. Loader.sin, kernel.sin, system.sin, fota0.sin, fota1.sin, simlock.ta, and so forth.

After that press OK and wait a few moments until the warning which you must press and hold the back button while plugging in the data cable to the PC.

Flashing began. Wait Flashtool goes up to 100% and your phone will reboot / turn on by itself. That's the sign that had been damaged Xperia has managed to fix your own with easy and fast :)

In principle all Xperia damaged when in flash stock firmware will reset back to normal. We are sorry for those of you who still fail in the Xperia sense you still will not turn on even though it would be flashed to stock rom. The only way, bring your Xperia to the nearest service center.
Do With Your Own Risk.